A.3 bridge point-to-multipoint (bpm) operation, A.4 e1 wan/ran optimization – Comtech EF Data CDM-840 User Manual
Page 178

CDM-840 Remote Router
Revision 2
Appendix A
MN-CDM840
A–4
A.3
Bridge Point-to-Multipoint (BPM) Operation
The Advanced VSAT BPM feature functions as a Learning Ethernet Switch when the “Working
Mode” is set to BPM. This makes the Advanced VSAT equipment appear as a “Sky Ethernet
Switch” and allows for a greatly simplified network deployment.
In BPM Mode, all L2/L3/L4 protocols such as VLAN, MPLS, IPv6, OSPF, and BGP will flow through
the network as they would through an off-the-shelf Ethernet Switch.
The Advanced VSAT System, running in BPM Mode, supports Flat Networks, Flat Networks with
Routers, and VLAN Trunking network topologies.
• Appendix C. BRIDGE POINT-TO-MULTIPOINT (BPM) OPERATION in this manual.
• Appendix C. BRIDGE POINT-TO-MULTIPOINT (BPM) OPERATION in the Comtech
EF Data ODM-840 Outdoor Remote Router / ODMR-840 Reduced Form Factor
Outdoor Remote Router Installation and Operation Manual (CEFD P/N
MN-ODM840)
• Appendix C. BRIDGE POINT-TO-MULTIPOINT (BPM) OPERATION in the Comtech
EF Data CTOG-250 Comtech Traffic Optimization Gateway Installation and
Operation Manual (CEFD P/N MN-CTOG250)
• Appendix C. BRIDGE POINT-TO-MULTIPOINT OPERATION (BPM) in the Comtech
EF Data CDD-880 Multi Receiver Router Installation and Operation Manual (CEFD
P/N MN-CDD880)
A.4
E1 WAN/RAN Optimization
E1 RAN (Radio Access Network) Optimization technology, jointly developed by Comtech EF Data,
CEFD sister division Comtech AHA Corp., and CEFD subsidiary Memotec Inc., is used to
significantly reduce the Wide Area Network (WAN) / satellite bandwidth required to carry an E1
bearer used for cellular backhaul. It is a feature available with the CDM-840 and ODM/R-840
Remote Routers and the CXU-810 RAN Optimizer.
• Appendix G. WAN/RAN OPTIMIZATION in this manual.
• Appendix G. WAN/RAN OPTIMIZATION in the Comtech EF Data ODM-840
Outdoor Remote Router / ODMR-840 Reduced Form Factor Outdoor Remote
Router Installation and Operation Manual (CEFD P/N MN-ODM840)
• Memotec CX-U Series Hardware Reference Manual (Memotec Inc. P/N CX-U-
HW-Guide)