Code Blue TOOLVOX X3 - Manual (Page 92)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 92 of 132
ToolVox® X3
Administrator Guide
Adding Devices to XProtect
This section will explain how to add devices to the XProtect system. Screenshots are from the Corpo-
rate Edition and may look different if you are using a different edition.
Devices can be any physical device that communicates through a ToolVox Media Gateway. Examples
of devices include, but are not limited to:
• Telephone that security personnel use to respond to calls from Code Blue products
• Code Blue wall mounted unit
• Code Blue pole mounted unit
• Code Blue speakerphone
Open the Management Client (or Management Application in some editions of XProtect). Right-click
the Devices node in the Site Navigation tree, and select “Add New...”.
ED-10049-A
User Guide
Code Blue ● ● ● ● ●
This section will explain how to add devices to the XProtect system. Screenshots are from the
Corporate Edition and may look different if you are using a different edition.
Devices can be any physical device that communicates through a ToolVox. Examples of
devices include, but are not limited to:
 Telephones that security personnel use to respond to calls from Code Blue products
 Code Blue wall mounted units
 Code Blue pole mounted units
 Code Blue speakerphones
Open the Management Client (or Management Application in some editions of XProtect). Right-
click the Devices node in the Site Navigation tree, and select “Add New...”.
ED-10049-A