Code Blue TOOLVOX X3 - Manual (Page 32)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 32 of 132
ToolVox® X3
Administrator Guide
Voicemail Playback Commands
Skip this section if not using Messages. See the System Recording on how to load
Messages.
Play Message 1 to Guard – 1st single message must be less than 18 seconds and will be played
only to the guard.
Play Message 1 at Unit – 1st message must be less than 18 seconds and will be played at the CB
unit until the guard answers.
Play Message 1 at Unit. Play Message 2 to Guard – 1st message must be less than 9 seconds
and will be played at the CB unit until the guard answers. 2nd message must be less than 9
seconds and will be played to the guard and at the CB unit until the guard answers.
Play Messages to Guard and at Unit – 1st message must be less than 9 seconds and will be
played at both ends after the guard answers. 2nd message must be less than 9 seconds and will be
played at both ends after the 1st message.
Message 1 & Message 2 – you can select System Recordings you have previously loaded.
Message Repeat – How many times to repeat the message.
Playback Volume – 3 is the highest
Other Options