Code Blue TOOLVOX X3 - Manual (Page 53)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 53 of 132
ToolVox® X3
Administrator Guide
In-Call Commands
This is used to display the In-Call Commands in the Pop-Up window on the Agents Computer if us-
ing the Event Management Software.
Enter in the most accurate Long and Lat of this specific CB unit. This will pop up a Bing Satellite
map on the Agents Computer if using the Event Management Software. Then set your pin locatio n
for the unit. You can also enter a locatino in the “Find” box.
Detailed Unit Location – you can select a custom map to place the CB unit onto, that will Pop-Up a
window on the Agents Computer if using the Event Management Software.
Location Description / Notes – Custom Detailed CB Unit location info that will Pop-Up a window
on the Agents Computer if using the Event Management Software.
Device Camera URL’s
Camera 1 & Camera 2 – You can enter up to 2 camera streams to tap into, that will display in the
Pop-Up a window on the Agents Computer if using the Event Management Software
Unit Address Info
Address Info that will appear in the Pop-Up window on the Agents Computer if using the Event Man-
agement Software
Push “Finish” when done