Code Blue TOOLVOX X3 - Manual (Page 38)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 38 of 132
ToolVox® X3
Administrator Guide
General Options
Programming Password – The password used to access programming mode(2) on initial calls into
the unit.
Off Hook Time – Maximum conversation time in minutes before CB phone hangs up.
Ring Time – The amount of time the phone will try a number before resetting and dialing the next
number 00-60.
Cycle Count – Number of cycles the CB phone will cycle through the above Numbers if a busy tone
is encountered
Auxiliary Output Closure Time – The default is for the duration of the call. Enter 01-99 seconds to
allow activation during a call by pressing the 6 key on the called party’s keypad
Phone Numbers
Enter in however many phone numbers you wish the CB phone to call. If upon encountering a busy
line it will roll to the 2nd number automatically. By Default the CB phone is set to roll through the
numbers twice. This can be controlled with the Call Cycle count option above. You can program up
to 6 numbers for the Red Help button or a combination of 6 numbers for the Red Help and Black
Info button if you have a double button phone.
In-Call Commands
This is used to display the In-Call Commands in the Pop-Up window on the Agents Computer if
using the Event Management Software.