Code Blue TOOLVOX X3 - Manual (Page 74)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 74 of 132
ToolVox® X3
Administrator Guide
3. • IP Unit Information Monitor
○ Check the boxes you wish to monitor.
○ Click on UPDATE IP MONITORING (Ill. 4D).
• IP Unit Address Range (only needed if using SIP or IAX)
○ Enter IP UNIT NETWORK/MESH.
○ Click UPDATE IP SUBNET (Ill. 4E).
• Max Analog or Pri Trunks for Testing Analog Phones
○ Enter MAX TRUNKS USED
○ Click UPDATE TRUNK AMOUNT (Ill. 4F).
• Update Access Information for EMS Software
○ Enter Authorization Code
○ Enter Authorization IP Subnet/Mask
○ Click UPDATE INFORMATION (Ill. 4G).
Illustration 4D
Illustration 4E
Illustration 4F
Illustration 4G