Code Blue TOOLVOX X3 - Manual (Page 54)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 54 of 132
ToolVox® X3
Administrator Guide
Push “Apply Configuration Changes”
Push “Continue with reload”
If you have UPD (Unit Programming and Diagnostics) then you can click “Program Extension” to
have ToolVox communicate out to the Unit and program it, provided the ToolVox is provisioned.
Make sure UPD administration is configured and Unit scan has been run since building your Code
Blue Devices.
You may also now copy the Code Blue extension you just built to save time. You will have to enter
in a unique Mac Address and Extension number as well. If you have EMS you will also need to
change that info.