Code Blue TOOLVOX X3 - Manual (Page 49)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 49 of 132
ToolVox® X3
Administrator Guide
Codec – this is the preferred codecs ToolVox will communicate with to the IP5000 phones.
Server – STUN server address for NAT traversal. STUN must be enabled on each account that
uses it.
Port – STUN Server port for NAT traversal. This is an advanced setting; it should typically be left at
the default of 3478
Date & Time
Daylight Savings – enable or disable
Time Zone – Choose your time zone
Enabled (NTP) – enable or disable NTP service
Server Address – by default your IP1500/2500/5000 will pull NTP from ToolVox and you can set the
ToolVox to pull NTP time from your server or from an external source.