Becker TRAFFIC ASSIST Z100 Crocodile - Manual (Page 66)

66
>>> NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Changing zoom steps and map angle
You can choose which zoom steps the
map should be changed to when the next
manoeuvre is approaching. You can also
set the map angle in 3D mode.
> Open the options menu for the map
display.
> Press the Map button.
> Press the
Map view button.
Depending on the current display (3D
view
or 2D view ) the settings op-
tions are different.
If you have changed the settings, press
OK
to save them.
To reset the options to the basic setting,
press the
Default range button.
To leave the settings menu without mak-
ing any changes, press the
button.
Setting options
You can select the areas where the dis-
played map should be zoomed. This set-
ting can only be changed if the Autozoom
function (
) is turned on.
> Press the button to select the
smallest desired zoom step.
> Press the button to save the set-
ting.
> Press the button to select the larg-
est desired zoom step.
> Press the button to save the set-
ting.
In the 3D display, you can set the angle of
inclination of the map display. This set-
ting can only be changed if the Autozoom
function (
) is turned on.
> Use the arrow buttons to set the de-
sired maximum angle of inclination.
> Press the button to save the set-
ting.
> Use the arrow buttons to set the de-
sired minimum angle of inclination.
> Press the button to save the set-
ting.
1
2
1 2
1
1
1
1
1
1