Becker TRAFFIC ASSIST Z100 Crocodile - Manual (Page 48)

48
>>> NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Displaying different route types
You can use the Traffic Assist to display
previously described routes.
> Press the Show route types on map
button.
After a short time, the map will appear.
The individual routes are calculated one
after another and marked on the map.
The area on the right-hand side shows the
colour key for the individual routes, the
mileage for each route and the estimated
driving time.
You can select the desired route by press-
ing one of the buttons.
Avoiding particular types of road
After pressing the button next to
Avoid
you can exclude various types of road, e.g.
motorways , ferries and toll roads , from
the route calculation.
You can set one of the following options
for each of these road types.
> Confirm your selection by pressing the
OK button.
Note:
This function can only be selected if
route guidance is already active or the
route option setting was called up from a
destination input window.
Note:
Please note that, in many cases, the fastest
route will overlay a simple or optimum
route. Option Meaning
Permitted With this option, the
road type in question is
included in calculating
the route.
Avoid With this option, the
road type in question is
avoided where possible.
Prohibited With this option, the
road type in question is
not included in calculat-
ing the route.