Becker mamba.4 LMU plus - Manual (Page 86)

86
>>>
Entering the destination
(Only available when route guidance is
not active.)
You can enter a destination.
> Call up the options menu for the map
display.
> Press the
Enter destination button.
> You can now enter a destination as
described under „The New destination
menu“ on page 45 (
Home , Enter
address , Select Point of Interest ,
Personal destinations , Contacts ,
Route planning , Select on map or
Enter geo-coordinates ).
Displaying/selecting different routes
You can use the Navigationsgerät to
display various routes.
> With the entire route displayed, press
the Alternative button. This function
can also be selected in the options of
the map display, See "Map display
options" on page 80.
After a short time, the map is displayed.
Each route is calculated after each other
and displayed on the map..
The area on the right-hand side shows
the colour key for the individual routes,
the mileage for each route and the
estimated driving time.
You can select the desired route by
pressing the buttons on the right.
Skipping a destination
If a planned route with several destina-
tions is active, you may delete the cur-
rent destination of the route. Route guid-
ance to the next destination is then
started.
This may be necessary if a destination
was not driven to directly. The Naviga-
tionsgerät otherwise tries to guide you to
the current destination.
> Call up the options menu for the map
display.
> Press the
Next destination button.
Route guidance to the next destination is
started.
NEU!