Becker mamba.4 LMU plus - Manual (Page 73)

73
NAVIGATION MODE >>>
The Format button
In the Format settings window you can
set the measurement units to be used
for times and distances.
> In the settings menu, press the
Format
button.
The Format settings window appears.
> Press the
Time button to switch between
the 12 hour clock and the 24 hour clock.
> Press the
Distance button to switch
between kilometres and miles.
> Confirm your settings by pressing the
button.
The Time button
You can select the time zone relevant for
your location in the
Time settings
window. This setting is important for the
correct calculation of the estimated time
of arrival.
> Press
Time in the settings menu.
The Time settings window appears.
Using the Time zone you can set whether
the time zone should be set
automatically by the Navigationsgerät or
not (
Use auto time zone on or Use
auto time zone off ).
If the automatic function is switched off,
you can select the desired time zone by
pressing the button below
Use auto time
zone .
The Reset button
You can reset the navigation settings to
their factory settings.
The settings will then be reset. The fast
access mode data, stored routes,
blocked routes, voice and home address
are retained.
> Press the
Reset button.
> Press the
Yes button.
The navigation settings are reset to their
factory settings.