Becker mamba.4 LMU plus - Manual (Page 72)

72
>>> NAVIGATION MODE
Setting Speed info
The
Speed info settings window allows
to select whether speed limits are
displayed in parallel to the navigation.
You can also receive an audible warning
about exceeding the speed limit.
> In the
Warnings settings window,
press the Speed info button.
The Speed info settings window ap-
pears.
The following settings are available.
> Confirm your selection by pressing the
button.
Note:
This information can only be displayed if
it is contained in the map material.
¤ Risk of accident!
The information in the map material
may be incorrect as a result of short-
term changes (road works, for
example).
The traffic situation and the local road
signs take precedence over the
navigation system information.
Setting Meaning
Show signs Select whether speed
limits are never
displayed, always
displayed or only
displayed if the limit is
exceeded. Furthermore,
you can select whether
the sign should blink
when exceeding the
speed limit, by selecting
Always or If speed limit
is exceeded .
In city Select the amount over
the speed limit at which
you would like to receive
an acoustic warning
within built-up areas.
Out of city Select the amount over
the speed limit at which
you would like to receive
an acoustic warning
within built-up areas.
Alert An audible signal is to
sound when exceeding
speed limits.
Voice
output A speaker’s voice warns
you of exceeding the
speed limit.
Setting Meaning