Becker mamba.4 LMU plus - Manual (Page 19)

19
INSTALLING NAVIGATION DEVICE >>>
> Push the bracket screw over the hand-
lebar.
> Put the square shaft with spherical
head onto the ends of the bracket
screw.
> Insert the adapter between the bracket
screw and handlebar. The bracket can
then no longer slip.
> Put on the washers and nuts.
> Do not overtighten the nuts.
Method 2 – Fastening on the brake or clutch
lever
> Remove the existing fastening screws
from the clamping holder on the brake
lever or clutch.
> Screw the square shaft with spherical
head onto the clamping holder. Use
the screws, washers, spacers and nuts
of the handlebar holder set for this
purpose.
Mounting the device holder and connecting
piece
> Place the connecting piece onto the
spherical head.
Notice:
The standard delivery includes screws
with 1/4 inch thread and M6 thread. Use
the screws whose thread size match the
existing screws on the brake lever or
clutch lever.