Navigation mode – Becker mamba.4 LMU plus User Manual
Page 48
48
>>>
NAVIGATION MODE
When sufficient letters have been
entered it will automatically switch to a
list from which you can select the town.
However, you can switch to the list
before this by pressing the
button.
Using the town list
Once a few letters of the desired town
have been entered you can display a list
of all the towns with the relevant letter
combinations or this list will be displayed
automatically.
> Press the
button on the right of
the screen to call up the list.
>
Using the
buttons or the scroll
wheel, it is possible to scroll through the
list.
> Press the button for the required town.
Selecting the street
In the
Street
menu field the street and
house number can be entered separate-
ly using a letter and number field.
The Navigationsgerät excludes all
impossible letter combinations and
activates only those letters that could
give an existing street name.
A house number can only be chosen
once the street has been selected and if
house numbers are included in the data.
> Enter the letters of the destination
street consecutively.
When sufficient letters have been
entered it will automatically switch to a
list from which you can select the street.
However, you can switch to the list
before this by pressing the
button.
Note:
If two words need to be entered you
must separate them with the character
.
Note:
If you have entered a postcode, the
name of the town will be hidden in the
input menu to start with. If you then
enter the street name, the name of the
town will then also be displayed.