Becker mamba.4 LMU plus - Manual (Page 84)

84
>>> NAVIGATION MODE
Blocking route temporarily
Using the Block road ahead option, you
can block a stretch of road ahead
temporarily. This determines a certain
stretch of road that should not be used.
The Navigationsgerät will now try to
calculate a detour.
> Call up the options menu for the map
display.
> Press the
Block the road ahead but-
ton.
> Select the length of block you want by
pressing the arrow buttons.
If route guidance is active, you can select
a road length between 200 m and 50 km.
As soon as you selected the stretch, a
new route will be calculated.
Furthermore, the distance and time
difference are also displayed in the lower
part of the display. Setting day/night display
You can switch the Navigationsgerät
display from day to night and vice versa.
> Call up the options menu for the map
display.
> Press the
Day/Night button.
The display changes from day to night
and vice versa.
Notes:
• The selected length of the block is
only an approximation since the
actual distance blocked depends on
the availability of an exit.
Notes:
• If route guidance is not active, you can
only select between 200 and 500 m
(250 and 500 yards). You can then
define directly the days and times
when the route should be blocked.
• After the temporary blocking of a
section, the Clear blockings option
appears in the option menu of the
map view. Press this button to delete
all temporary blockings. If a route
guidance is active, the former route is
restored.