Pixit – Basler Electric BE1-11 IEC 61850 Protocol User Manual
Page 88

80
9424200892 Rev F
SERVICES
AA:
TP/MC
Client/
subscriber
Server/
publisher
Value/
comments
Notes:
c6 - shall declare support for at least one (BRCB or URCB).
c7 - shall declare support for at least one (QueryLogByTime or QueryLogAfter).
c8 - shall declare support for at least one (SendGOOSEMessage or SendGSSEMessage).
c9 - shall declare support if TP association is available.
c10 - shall declare support for at least one (SendMSVMessage or SendUSVMessage).
TP - Two Party
MC - Multicast
O - Optional
M - Mandatory
PIXIT
This document specifies the protocol implementation extra information for testing (PIXIT) of the IEC
61850 interface in BE1-11 Feeder Protection System.
Together with the PICS and the MICS, the PIXIT forms the basis for a conformance test according to IEC
61850-10.
Each table specifies the PIXIT for each applicable ACSI service model as structured in IEC 61850-10.
Table 22. PIXIT for Association Model
Description
Value / Clarification
Maximum number of clients that can set-up an
association simultaneously
4
TCP_KEEPALIVE value
16 seconds
Lost connection detection time
16 seconds
Is authentication supported?
N
What association parameters are necessary for
successful association?
Transport selector
Session selector
Presentation selector Y
AP Title
AE Qualifier
If association parameters are necessary for
association, describe the correct values e.g.
Transport selector
Session selector
Presentation selector
AP Title
AE Qualifier
What is the maximum and minimum MMS PDU
size?
Max MMS PDU size
Min MMS PDU size
What is the maximum startup time after a power
supply interrupt?
17 seconds
Conformance Statements
BE1-11