Basler Electric BE1-11 IEC 61850 Protocol - Manual (Page 38)

32 9424200892 Rev F
Table 9. Published IED GOOSE Example Values
Setting Range Value
GOOSE Control Name String (65) GCB1
Dataset String (255) DataSet01
Configuration Revision 1 to 65535 1
App ID 00 to FF 0001
Go ID String (65) testgoose
MAC Address 00 to FF (per each hexadecimal group) 01-0C-CD-01-00-01
VLAN ID 000 to FFF 0
VLAN Priority 0 to 7 0
Max Time 1 to 65536 20000
Step 4: Right-click on the BE1_11_1 file in the Workspace and select Validate. The round indicator
located on the left side of the file name changes from yellow to green if validation is successful.
Step 5: Repeat Steps 1 through 4 to configure additional Published IED GOOSE messages.
Configure Subscribed IED GOOSE
Step 1: Select the Subscribed IED GOOSE tab in BEST61850. See Figure 31. A maximum of 20
Subscribed IED GOOSE messages is allowed.
Step 2: Highlight the BE1_11_2 file in the Workspace. Click the New GOOSE Subscribe button. The
Add New Subscribed GOOSE screen appears. See Figure 32.
Step 3: Make the appropriate settings changes by selecting the Source IED (BE1_11_1) Data Tags
(INDGGIO1$Ind01$stVal) Mapped To (BE1_11_2) FCDA
CTLGGI01$CO$SPCSO1$Oper$ctlVal and click the Add button.
Step 4: Right-click on the BE1_11_2 file in the Workspace and select Validate. The round indicator
located on the left side of the file name changes from yellow to green if validation is successful.
Step 5: Repeat Steps 1 through 4 to configure additional Subscribed IED GOOSE messages.
BEST61850™ BE1-11