Iec 61850 engineering, Engineering process in iec 61850, System configurator – Basler Electric BE1-11 IEC 61850 Protocol User Manual
Page 11

9424200892 Rev F
5
IEC 61850 Engineering
The engineering process and configuration of a substation is described in IEC 61850-Part 6:
Configuration description language for communication in electrical substations related to IEDs.
This section contains information about the standard that may be referenced when working with
BESTCOMSPlus
® and BEST61850™ software.
Engineering Process in IEC 61850
Figure 3 illustrates the reference model for information flow in the configuration process.
Figure 3. Reference Model for Information Flow in the Configuration Process
The IEC 61850 standard defines two tools and four file types for Engineering as illustrated in Figure 3.
The tools and file types are defined below.
System Configurator
The System Configurator performs the following functions:
•
Imports and exports configuration files
•
Imports configuration files from several IEDs for system level engineering
•
Generates a substation related configuration file
•
Reads an SSD file as a base for starting system engineering or for comparisons
The complete station configuration is exported in the SCD file for further use by the various IED
configuration tools.
System
Configurator
IED
Configurator
IED
Database
Substation
Gateway
IED
IED
IED
Engineering Environment
Substation
IED Capabilities
ICD File
System Specification
SSD File
Substation Configuration
SCD File
File transfers and parameterization
with IEC 61850 services
Local file transfer
P0061-56
Configured IED
CID File
BE1-11
IEC 61850 Engineering