Basler Electric BE1-11 IEC 61850 Protocol - Manual (Page 81)

9424200892 Rev F 73
Conformance Statements
The following conformance statements described in this chapter are applicable for a BE1-11 Protection
System with firmware version 2.08.02:
•
MICS (Model Implementation Conformance Statement)
•
PICS (Protocol Implementation Conformance Statement)
•
PIXIT (Protocol Implementation eXtra Information for Testing)
•
TICS (TISSUES Implementation Conformance Statement)
MICS
This MICS document specifies the modeling extensions compared to IEC 61850 Edition 1. For the exact
details on the standardized model, please compare the ICD substation configuration file: “BE1_11.icd”,
version 3.1.0.0.
Table 17 contains the list of logical nodes implemented in the device.
Table 17. Logical Nodes
BE1-11f BE1-11i BE1-11g BE1-11t BE1-11m
L: System
Logical node zero: LLN0 LLN0 LLN0 LLN0 LLN0 LLN0
Physical device information: LPHD1 PHYDEV PHYDEV PHYDEV PHYDEV PHYDEV
P: Protection functions
Distance: PDIS1,PDIS2 21-1, 21-2
Volts Per Hz : PVPH1 24 24 24
Undervoltage : PTUV1, PTUV2, PTUV3, PTUV4,
PTUV5 27P-1 to 5 27P-1 to 5 27P-1 to 5 27P-1 to 5 27P-1 to 4
Undervoltage : PTUV6, PTUV7, PTUV8, PTUV9 27X-1 to 4 27X-1 to 4 27X-1 to 4 27X-1 to 4
Directional Over Power : PDOP1 32-1
optional
32-1 32-1
Directional Under Power : PDUP1 32-2
optional
32-2 32-2
Directional Under Power : PDUP2 32-1
Time Undercurrent: PTUC1 37
Loss of Excitation Reverse Var Based : P40QPDUP1 40Q 40Q
Loss of Excitation Impedance Based : P40ZPDUP1 40Z
Incomplete Sequence: PMSS1 48
Thermal Overload : P49TCPTTR1 49TC
Thermal Overload: P49RTDPTTR1, P49RTDPTTR2,
P49RTDPTTR3, P49RTDPTTR4, P49RTDPTTR5,
P49RTDPTTR6, P49RTDPTTR7, P49RTDPTTR8,
P49RTDPTTR9, P49RTDPTTR10, P49RTDPTTR11,
P49RTDPTTR12, P49RTDPTTR13, P49RTDPTTR14 49RTD-1
to
49RTD-14
49RTD-1
to
49RTD-14
49RTD-1
to
49RTD-14
49RTD-1
to
49RTD-14
49RTD-1
to
49RTD-14
Instantaneous Overcurrent : PIOC1, PIOC2, PIOC3,
PIOC4, PIOC5, PIOC6, PIOC7, PIOC8, PIOC9 50-1 to
50-6
50-1 to
50-6
50-1 to
50-6
50-1 to
50-9
50-1 to
50-6
Time Overcurrent : PTOC1, PTOC2, PTOC3, PTOC4,
PTOC5, PTOC6, PTOC7, PTOC8, PTOC9 51-1 to
51-5
51-1 to
51-5
51-1 to
51-5
51-1 to
51-9
51-1 to
51-5
Voltage Control Overcurrent : PVOC1, PVOC2 51-6, 51-7 51-6, 51-7 51-6, 51-7
Transformer Time Overcurrent: P51TFPTOC1 51TF
Under Power Factor: PUPF1 55
BE1-11 Conformance Statements