Avery Dennison 9400 Series Programmer Manual - Manual (Page 63)

Clear Image Buffer
This command clears all or selective graphics from the image
buffer. Once graphic data is sent to the printer, that graphic
stays in memory until a clear image buffer command is sent.
{ C## }
Example
{C}
Field Contents
C
Must be the letter ‘C’ to identify the clear
image buffer command. See the next
section for more information about the
clear command.
##
This optional parameter will specify a
particular graphic to be cleared from
memory. It must match the number
assigned in the graphic data stream. If
omitted, ALL graphics in memory will be
deleted.
Example {C} Clears all graphics from the printer.
{C4} Clears only graphic number 4.
Usi
n
g
G
rap
h
ics
5. Using Graphics
5-11