Avery Dennison 9400 Series Programmer Manual - Manual (Page 14)

4. Select the parity you need and press
E
. You’ll see
Enter Word Length [7-8]: 8
5. Select the word length you need and press
E
. You’ll
see
Enter Stop Bits [1-2]: 1
6. Select the stop bits you need and press
E
. You’ll see
Enter Start (XON) character:
17
7. Enter a number from 1-127 for XON flow control, or 128 for
DTR flow control. You’ll see
Enter Stop (XOFF) character:
19
8. Enter a number from 1-127 for XOFF flow control, or 128
for DTR flow control.
NOTES:
•
If you select DTR control (128) as the XON character,
the printer will automatically set 128 (DTR control) for
the XOFF character.
•
The Start and Stop characters must be set at 128 (DTR
flow control) for IBM PC equipment.
You’ll see the Configuration Options menu.
Press
!
to exit to the main menu.
9400 Series Programmer’s Manual
3-4