Avery Dennison 9400 Series Programmer Manual - Manual (Page 45)

;BATCH_NAME
One to eight characters for the name of
the batch. A priority batch name must
begin with a decimal. For example:
.SOCKS12.
NOTE: Each batch should have a unique
name, or you can omit the name
for automatic batch naming. If
multiple batches are sent with the
same name, all batches are
stored with the same name.
If you omit the batch name, the
printer will generate unique
names which begin with the
letters "AUTO" and end with a
4-digit number. The 4-digit
number is an increment and can
have a value from 1-9999
(example: AUTO1354, where
1354 equals the increment).
Example
{B11,200,2,5,2,0,3;
p
This batch has the following attributes:
•
This batch prints data using format 11.
•
This batch will print 200 tickets.
•
The printer will cut after each ticket is printed, including
the last ticket (2).
•
Each ticket will print 5 times.
•
This is a two-part ticket. The format will print 2 times
horizontally across each ticket.
•
A double-length separator will print between batches (3).
•
The batch name will be automatically assigned by the
printer (no characters between the semi-colon and the
record separator).
M
essag
e S
tru
ct
u
res
4. Message Structures
4-29