beautypg.com

Avalon Firestyles GreenStart Igniter 2 for Inserts User Manual

Page 6

background image

GreenStart Igniter 2 for Inserts:

Installation Instructions

(SKU 94400952)

Page 6 of 12

17601768.docx— 10/21/13

© Travis Industries, Inc.

Cape Cod Flush Wood Plus Start Button Installation:

Drill a

9

/

64

” hole approximately 2” from the flat end of the left side trim panel. Enlarge the hole with a ½”

drill bit.

Affix the GreenStart sticker over the trim panel hole, and then insert the color-coded start button wires
through the hole. The start button should be flush with the trim panel.

Connect the igniter assembly wires; orientation does not matter.
Connect the start button wires to the igniter assembly.

NOTE: The wires are color-coded and must be matched.