Avalon Firestyles GreenStart Igniter 2 for Inserts - Manual (Page 11)

GreenStart Igniter 2 for Inserts:
Installation Instructions
(SKU 94400952)
Page 11 of 12 17601768.docx— 10/21/13 © Travis Industries, Inc.
2. This next piece of wood is the key. It should be approximately 2-3” in diameter with no bark. Place it
directly behind the igniter opening, parallel with the door opening. Done correctly, this piece will
ignite along its entire length, starting the fire quickly and burning long enough to light the other pieces.
3. Place additional pieces of wood directly in front and in back of the piece of wood placed in step 2. Make
sure the wood runs parallel to the igniter air flow and is spaced far enough apart to allow air to flow.
4. Continue to stack your kindling in a criss-cross pattern. Make sure to provide enough room for air
flow. Bigger pieces may be stacked on top of the pile.
Igniter
Air Flow
Igniter
Opening