Avalon Firestyles Fyre-Stones Set C User Manual
Fyre-stones set “c” installation instructions
Fyre-Stones Set “C”
Installation Instructions
(sku 94700764)
Page 1 of 14
17601709 - 7/17/12
© Travis Industries, Inc.
Items Required
¼” Crushed Glass (see page 14 for quantities):
-- Platinum (94500580)
-- Reflective Bronze (94500581)
-- Cobalt (94500582)
Compatibility
33
DVI
DVL GSR NB with Dancing-Fyre Burner
864 HO NB with Diamond-Fyre Burner
Cypress
Stove
Installation Warnings
The glass must be installed in accordance with this installation manual or instruction sheet.
Failure to install the glass correctly may lead to a safety hazard and will void the warranty
The stones must be placed before placing the glass to prevent sooting.
The stones are fragile, especially after being exposed to heat.
Make sure the gas control valve is “OFF” and the heater is cool prior to conducting service.
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage or personal injury.
The burner must be correctly positioned before installing the stones. Make sure the burner is fully seated
and the pilot is properly aligned. See the Owner’s Manual for details on burner removal.
HINT: If using propane (LP), convert the appliance before installing the stones.
HINT: If using optional firebacks, first make the modifications to the burner. After modifying the burner, install
the firebacks then the stones.