Avalon Firestyles DVL Rosario Door - Manual

Rosario Door (DVL Insert, FP)
Gold #99300429 Nickel # 99300430 Bronze # 99300416
Page 1 of 1 Printed June 26, 2007
CHECK CONDITION OF SHIPMENT
Upon receipt of this kit, check the condition of the packaging. Damage to the package should be noted on the carrier's freight
receipt. Any damage claims as a result of shipping must be handled through the shipper. Travis Industries will provide assistance
in resolving shipping claims or replacing items not included in the package. Please report any missing items immediately.
COMPATIBILITY
• Travis Ind. DVL Insert or Fireplace with Rosario Face (Part # 99300428)
PACKING LIST
• Door
INSTALLATION INSTRUCTIONS
! Turn the gas control valve to "OFF" prior to conducting any service.
1 On the DVL Insert, the panels must be installed prior to installing the face.
2 Install the Rosario face following the directions included with the face.
3 Remove the existing door and install the new door following the steps below.
Attach the door by inserting
the hooks on the door over
the pins built into the face
(after installing the logs and
glass).
GOLD DOORS:
After installation, remove tape and clean surface
with denatured alcohol and a soft cloth.
Door
Four screws are used to secure
the door during shipping.
Remove and discard these
screws before installing the door.