Avalon Firestyles GreenStart Igniter 2 for Inserts - Manual (Page 4)

GreenStart Igniter 2 for Inserts:
Installation Instructions
(SKU 94400952)
Page 4 of 12 17601768.docx— 10/21/13 © Travis Industries, Inc.
Attach the igniter housing to the side of the insert using the screws removed earlier, as shown below. Place
the gasket removed in step 1 between the igniter housing and insert.
Large Flush Wood Insert
Use the housing included with the insert (not the housing included with the kit - see manual for details).
Attach the igniter assembly to the housing using the screws provided, as shown below. Note that the igniter
gasket is placed between the housing and igniter assembly.
Connect the compressor hose to the igniter as shown and secure with the included hose clamp.
Connect the igniter wires. Orientation of the wires does not matter. Wrap the wires around the compressor
hose.