beautypg.com

Avalon Firestyles GreenStart Igniter 2 for Inserts User Manual

Page 12

background image

GreenStart Igniter 2 for Inserts:

Installation Instructions

(SKU 94400952)

Page 12 of 12

17601768.docx— 10/21/13

© Travis Industries, Inc.

5. Make sure the air control and bypass are in the open position.

6. Close the stove door when all kindling is in place.

7. Press the igniter button to start the ignition process.

The green indicator light on the button will turn on.
The igniter and compressor assembly will run for 15
minutes before shutting off automatically.


NOTE: If you need to turn off the igniter after starting the ignition process, press the GreenStart button a
second time. The system will turn off power to the igniter and the GreenStart button will flash. The pump
will continue to run for about seven minutes and then shut off.

ADDED FEATURE – “BELLOWS ONLY”:


If a bellows effect is desired (adding oxygen to the fire without cycling the igniter) simply push the
GreenStart button twice, which will start the pump-only mode. The bellows effect will stay on for 7
minutes, before the unit shuts down.