Artesyn PCIE-8120 Installation and Use (July 2014) - Manual (Page 46)

Application Development Overview
PCIE-8120 Installation and Use (6806800R89C) 46
For details about how to set the configuration parameters, see Octasic documentation Vocallo
Media Gateway API Configuration Guide, and the octvoctn5009-sys_config.pdf file at
/opt/octasic/software/octvoc
location.
For details about how to use the firmware image generator, see Octasic documentation and
the oct2200m_boot_image_gen.html file at
/opt/octasic/application/oct2200/oct2200_boot_img_gen
location.
Once you have created a new firmware image you should copy it to the tftpboot folder. For
details about how to copy firmware image to the tftpboot folder, see
Executing Demo on
page 36 .
To load the new firmware image into the DSPs, you should execute:
# octservice stop all
# octservice start all
5.3.2 12xDSP Audio Transcode Demo
An example application in source code and as an executable for the reference platform is
provided in12dsp_audio_transcode_net_api at the
/opt/octasic/application/sample/octvoc/12dsp_audio_transcode_net_a
pi
location.
1. octvc1._config.arg file is provided as an example for 12dsp audio application.
Align the resources of the DSP based on your application.
2. Also, keep the hardware-specific configuration parameters (port interface,
TdmModule) as specified in the RPM (see the first set of configuration parameters
above).