Artesyn PCIE-8120 Installation and Use (July 2014) - Manual (Page 32)

Software Installation
PCIE-8120 Installation and Use (6806800R89C) 32
Unpack and install the following rpm files:
1. The pcie8120-.zip file contains an RPM with the support package. Install
the RPM with:
# rpm -ihv pcie8120-.el6.x86_64.rpm
.
The installed software will be in /opt/bladeservices.
2. The octasic-sdk-.zip file contains two RPMs with the Octasic software
and a support library. Install them with:
# rpm -ihv sofia-sip-.el6.x86_64.rpm
# rpm -ihv octasic-sdk-.el6.x86_64.rpm
.
The installed software will be in /opt/octasic.
After the installation, add /opt/bladeservices/bin to the PATH variable of the user.
export PATH = $PATH: /opt/bladeservices/bin
4.3 PCIE-8120 Software Package
LIBRARY
 The library is a C-programming interface provided for software development that provides
access to the resources on the card.The components that can be accessed are:
1. Switches
The DSPs are connected to the ports of the switches. You can configure the switches.
2. CPLD
The CPLD provides access to functions and components of the card.
The CPLD controls the reset state of the DSPs and provide access to the onboard
voltage and temperature sensors.
 Installing the RPM creates the following folders and files:
Folder Description
/opt/bladeservices/bin
Contains tools.
/opt/bladeservices/share/doc/htm
l
Contains documentation.