Artesyn PCIE-8120 Installation and Use (July 2014) - Manual (Page 31)

Chapter 4
PCIE-8120 Installation and Use (6806800R89C) 31
Software Installation
4.1 Prerequisites
 Before installing the PCIE-8120 card, ensure that the following software packages are
installed on your host:
1. vconfig
2. xinetd
3. net-tools
4. dhcp
5. tftp-server
6. pciutils
7. ethtool
8. policycoreutils-python (needed if SELinux is installed and enabled)
 Download the following packages from the SWORDS portal or you can contact your local
Artesyn support personnel to get them installed on your host:
1. PCIE-8120 support package: PCIE8120-.zip
2. Octasic software package: octasic-sdk-.zip
3. Documentation package: PCIE8120-doc-.zip
 Follow the steps below for software installation:
1. Mount the card in your system. For more information on PCIE-8120 card installation,
see Card Installation and Removal on page 28 .
2. Install the software. For software installation procedure, see Installing Software on
page 31 .
3. Run the demo.
NOTE: Before starting the demo, refer to known issues section in C.1 on page 81 .
4.2 Installing Software
You must be a super user to install the packages or to execute some tools from the support
package.