Features, functions, and specifications, Introduction, Features and functions – AMETEK SFA Series Programming Manual User Manual
Page 7: Section 1, Features, functions, and specifications -1, Introduction -1, Features and functions -1

SECTION 1
1.1 Introduction
1.2
FEATURES, FUNCTIONS,
AND SPECIFICATIONS
This manual covers the Digital Interface Adapter (DIA) for SF Series supplies. The DIA interface
card enables the user to operate from a computer via the IEEE-488.2 GPIB or RS-232 interface,
allowing full remote programming control and monitoring of the SF Series supply.
Features and Functions
Features
• 16-bit programming and 16-bit readback of voltage and current
• IEEE-488.2 and SCPI compliant command set
• Current Ramp functions
• Field-upgradable firmware via RS-232
• Soft
calibration
• Rear panel IEEE-488.2 and RS-232 control interface
• Rear panel configuration switch
Programmable Functions
• Output
current
• Soft limits for current
• Output
enable/disable
• Maskable fault interrupt
• Hold and trigger
• Full
calibration
M550292-03 (Programming)
1-1
- CW-M (48 pages)
- CW-M Corrected Table 4-2 in (1 page)
- CW-P (62 pages)
- Lx Series (205 pages)
- CW Series Programming Manual (25 pages)
- Ls Series II Programming Manual (242 pages)
- Compact i/iX Series (157 pages)
- Compact IX 2253 (157 pages)
- Compact i/iX Series Software Manual (203 pages)
- ASD Series Quick Start (5 pages)
- ASD Series (120 pages)
- i-iX Series II Programming Manual (226 pages)
- DLM 600W Series Programming Manual (24 pages)
- M131 Programming Manual (99 pages)
- DLM Series (74 pages)
- DLM 600W Series (82 pages)
- BPS Series (153 pages)
- DLM600 Series (16 pages)
- DCS-E 1.2kW Series (65 pages)
- DLM-E 4kW Series Programming Manual (32 pages)
- M136 (8 pages)
- DCS-E 3kW Series (94 pages)
- CTS 3.0 (166 pages)
- CSW Series (174 pages)
- 2003RP (126 pages)
- 2001RP (131 pages)
- MX CTSH (151 pages)
- MXCTSL Administrator Manual (27 pages)
- MX CTSL (157 pages)
- RS Series (228 pages)
- MX Series Installation Manual (35 pages)
- Ls AC source (2 pages)
- MX15 Series (184 pages)
- Ls Series II (226 pages)
- Lx Series Driver Manual (275 pages)
- MX Series Rev: AY (257 pages)
- iX Series (341 pages)
- i-iX Series II (258 pages)
- GUPS 2400A-108 (36 pages)
- HPD Series (58 pages)
- HPD Series Operation Manual (41 pages)
- HPD Series GPIB-Multichannel (134 pages)
- PLA-PLW Programming Manual (74 pages)
- ReFlex Mating Connnectors for Controller (3 pages)
- LPDC-16V (4 pages)