AMETEK SFA Series Programming Manual User Manual
Sf series
SF Series
IEEE-488.2/RS-232 Option
Programming Manual
Power Supplies
Elgar Electronics Corporation
9250 Brown Deer Road
San Diego, CA 92121-2294
1-800-73ELGAR (1-800-733-5427)
Tel: (858) 450-0085
Fax: (858) 458-0267
Email: [email protected]
www.elgar.com
©2004 by Sorensen, Division of Elgar Electronics Corporation
This document contains information proprietary to Sorensen, Elgar Electronics Corporation. The information
contained herein is not to be duplicated or transferred in any manner without prior written permission from Sorensen.
November 5, 2004
Document No. M550292-03 Rev 01
Table of contents
Document Outline
- FEATURES, FUNCTIONS, AND SPECIFICATIONS
- CONFIGURATION
- IEEE 488.2 AND SCPI COMMAND OPERATION
- Introduction
- IEEE-488.2 Register Definitions
- IEEE-488.2 and SCPI Conformance Information
- IEEE-488.2 Common Command Subsystem
- SOURCE SCPI Command Subsystem
- MEASURE SCPI Command Subsystem
- OUTPUT SCPI Command Subsystem
- STATUS SCPI Command Subsystem
- SYSTEM SCPI Command Subsystem
- TRIGGER SCPI Command Subsystem
- CALIBRATION SCPI Command Subsystem
- Examples of Using the SCPI Commands
- CALIBRATION
- SCPI STATUS IMPLEMENTATION