AMETEK SFA Series Programming Manual - Manual (Page 23)

Sorensen SF Series IEEE 488.2 and SCPI Command Operation
Command Description SCPI Q?
:STATus
:BLOCk? Returns the block of data critical to the status
of the channel:
1) channel number
2) online status
3) status flags register (see table below)
4) status register
5) accumulated status
6) fault mask register
7) fault register
8) error register
9) model serial number
10) model voltage
11) model current
12) model over-voltage
13) output voltage DAC gain
14) output voltage DAC offset
15) output current DAC gain
16) output current DAC offset
17) output voltage protection DAC gain
18) output voltage protection DAC offset
19) voltage measurement ADC gain
20) voltage measurement ADC offset
21) current measurement ADC gain
22) current measurement ADC offset
23) model string
24) OVP calibrated
Each value is separated by commas.
N
:REGister? Returns the integer value of the status register.
See Section_5. N
:TIMeout? Returns the integer value 1 (timeout since last
query) or 0 (no timeout) of the timeout status of
the channel. N
M550292-03 (Programming) 3-11