Xtramus NuBAR-1000 V1.4 - Manual (Page 51)

50
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES ®

Tx Byte: Transmitted data bytes.
Y : Received Counter at Lord NuBAR-1000 that is transmitted from Servant NuBAR-1000 in
symmetric loop test.
 Rx Rate: Receive rate from ongoing test stream generated from Servant NuBAR-1000.
 Z : Rx Maximum Rate: Maximum receive rate from ongoing test stream generated from
Servant NuBAR-1000.

Rx Packet: Received packet counts
 Rx Byte: Received data bytes.
 CRC Error: CRC error packet counts found from received packet
 Packet Loss: Packet loss counts found from Servant to Lord.
 A2 : Packet Loss (Both): Packet loss counts found from both Lord to Servant and Servant to
Lord.
A3 : Close this Window
5.4.4 Asymmetric Loop Test
Click at Shortcut Key bar.
For the symmetrical loop test above, Lord and Servant send symmetrical test stream to each
other for the test. For this asymmetric loop, the test stream and transfer rate between local Lord
NuBAR-1000 and remote Servant NuBAR-1000 is different.