Xtramus NuBAR-1000 V1.4 - Manual (Page 44)

43
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES ®
D : Transfer Rate: The transmission throughput in Mbps
E : Length: The length of test packet, from 64 bytes to 1518 bytes and random
F : Payload: Contents in hexadecimal mode carried in Ethernet frame (packet). Default is
Random payload and other type of payload will created in the future
Criteria
G : Loss Packets packets
If loss packet counts are beyond the criteria configured here, the test is failed.
5.4.1.5 Default User Defined Function E: ADSL 10M/20M
Location E9 : Default User Defined Function E: ADSL 10M/20M
This function is the same as E5 P2P test. Tune the Transfer rate between local and remote site,
then operator can has parameter of ADSL that the transfer speed is not symmetric.
Local vs. Remote
The configuration of transmission between Lord and Servant can be different that is quite useful
for test on ADSL transmission. Locate servant NuBAR-1000 at the port of DSLAM in central
office and take the lord NuBAR-1000 to do the on-site test.
E9