Xtramus NuBAR-1000 V1.4 - Manual (Page 17)

16
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES ®
There is no test result and termination for the test.
Rotary function switch location
Servant NuBAR-1000: 8
9 Loopback Slave
(layer2) This mode is test for other non-NuBAR-1000 device (Packet
Generator). NuBAR-1000 resend incoming test frames from other
non-NuBAR-1000 device to its received port with switched DA / SA
(destination / source MAC address) and recalculated CRC.
There is no test result and termination for the test.
Rotary function switch location
 Servant NuBAR-1000: 9
A~E Customized
settings Customized test settings that can be configured by PC via USB port.
There are pre-configured default settings for other test. Please refer
to
Rotary function switch location
 Lord NuBAR-1000: A~E
 Servant NuBAR-1000: 0
F PC control Remote control, configuration and firmware/FPGA update by
NuBAR-WIN application software via USB port.