Xtramus NuBAR-1000 V1.4 User Manual

Page 39

Website: www.

tramus.com

XTRAMUS TECHNOLOGIES



Loopback Test: Transmit BERT (Bit Error Rate Test) pattern for loopback test.

: NuBAR ID

A read-only value of Current NuBAR ID, which can be tuned by NuBAR ID rotary switch on the

panel of the device.

: Local Speed: Auto or force test speed and duplex mode that generates from local side. Force

mode includes 10Mbps full duplex only.

: Remote Speed: Auto or force test speed and duplex mode that generates from remote side.

Force mode includes 10Mbps full duplex only.

: Length (bytes): The length of test packet, from 64 bytes to 1518 bytes and random

: Transfer Rate (Mbps) Local to Remote: The transfer rate in Mbps from local to remote side

: Transfer Rate (Mbps) Remote to Local: The transfer rate in Mbps from remote to local side.

When this value is applied to Lord NuBAR-1000, the Lord NuBAR-1000 negotiates with the

Servant NuBAR-1000 to transfer the test streams back to Lord NuBAR-1000.

: Payload: Contents in hexadecimal mode carried in Ethernet frame (packet). Default is Random

payload and other type of payload will created in the future.

Button

: Load From File: Select a configuration file that is created and saved previously for the test.

: Save to File: Save current configuration to a file. System shows the directory for user to select

the location to save the file

: Apply to NuBAR-1000: Apply these configurations to the NuBAR-1000 for offline test. Be sure

that a NuBAR-1000 is connected by USB cable before this operation. Only NuBAR-1000 that

acts as Lord mode is required to do this procedure. NuBAR-1000 in servant mode accepts

control from Lord, so the test configuration will be passed to servant when test starts.

5.4.1.2 Default User Defined Function B: Packet Generation Test

Position

: Default User Defined Function B: Packet Generation Test