Xtramus NuBAR-1000 V1.4 - Manual (Page 13)

12
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES ®
3. Function of Rotary Switch and Buttons
At the bottom of this machine, there are rotary switches and buttons for almost all operation of
this machine. Rotary switches are for the configuration of this machine and buttons are for the
operation of this machine.
3.1 Rotary Switches for Configuration
There are several 16 scales rotary switches, scales from 0 to 9, A to F for 16 functions.
Use ceramics screwdriver that comes with NuBAR-1000 package to rotate this switch for the
function below:
As the description at few sections above, the table is the general description of rotary switch
Label Scale Description
Function 1 set
16 scales
0~9, A~F 16 function modes
0~9: Pre-defined function
A~E: Customized settings
F: Control by PC via USB port.
ID 2 sets
16 scales
0~9, A~F Pair mapping control of NuBAR-1000 if there are
more then one pair of NuBAR-1000 connected in
the same network.
Test Time
(sec) 2 sets
16 scales
0~9, A~F It is for the configuration of test duration each time.
Duration in seconds is configured in hex mode.
3.1.1 Rotary Function Switch
There is one 16 scales Functional Rotary Switch for 16 functions
Rotary Switch
Function
ID
Test Time