Xtramus NuBAR-1000 V1.4 - Manual (Page 25)

24
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES ®
 Select the same ID for a pair of NuBAR-1000
For a test that is work by a pair of NuBAR-1000, the ID number of the two NuBAR-1000 has to
be the same. The default ID of NuBAR-1000 is "00". , means Lord accepts any reply from
Servant if NuBAR-1000 is in Lord mode and Servant replies any request from Lord if
NuBAR-1000 is in Servant mode.
Rotate two ID rotary switches to other value, such as "01" for two NuBAR-1000.
Lord NuBAR-1000 Servant NuBAR-1000
 Configure the test duration for a single test
Test duration is configured by hexadecimal mode that is described at 3.1.3 Test Time Rotary
Switch
For 1 minutes (60 seconds) test
Lord NuBAR-1000 Servant NuBAR-1000
4.2.2 Start the Test Procedure
 Power ON both Lord and Servant NuBAR-1000 from power switch.
Note: To fit the compact size of the NuBAR-1000, the power switch is tiny. To prevent damage of
this switch, please slide the switch carefully or push it via the attached ceramic screwdriver.
0
1
0
1
3
C
Configuration for
Servant NuBAR-1000
is not required
Turn On