Erasing procedure – Pointmaker CPN-5800 User Manual
Page 93

Boeckeler Instruments, Inc.
Pointmaker CPN-5800 Color Video Marker - Page 87
Section Four: Using Markers
Clearing Markers
Figure 4-4: Erase Method Menu
The Erase Method dialog appears.
4. Select an eraser size SMALL, MEDIUM, or LARGE.
The active size displays a white fill.
NOTE: The larger the eraser size, the more area you can clear in a single
motion. If you do not select an eraser size, the Pointmaker will default to
Medium. Selecting the UNDO option allows you to undo a marker, rather
than erase it.
5. Exit the menu system.
Erasing Procedure
Follow these instructions to erase markers. Be sure you are in Erase mode
before implementing these procedures
(see Erasing Markers, on page 86.
From the SMARTBoard
®
The default mode for SmartBoard operation is Clear. When you remove the eraser
from the SmartBoard pen tray and touch it any where on the board, the Pointmak-
er overlay will clear.
If you would prefer to erase the Pointmaker overlay in the same way that you
would erase dry erase markers, please use the following pro cedure: