Pointmaker CPN-5800 - Manual (Page 65)

Pointmaker LLC Pointmaker CPN-5800 Live Streamimg Annotation System - Page 59
Section Three: CPN-5800 Menu System Serial Port Settings
NOTE: All the USB devices installed on your CPN-5800 are listed by
port number, with the device type displayed to the right of each number.
If the device type is in blue, it has been assigned through the autodetect
procedure at startup.
NOTE: When the question mark to the right of the device is selected,
the system displays the vendor and product ID for the device.
5. (optional) Select the device type you wish to have permanently assigned.
By selecting the device, it becomes permanently assigned. The text color then
changes from blue to black. With the device permanently assigned, the next
time the CPN-5800 is powered up, the autodetect procedure will skip this
device.
The system does an excellent job of immediately detecting and rec ognizing
USB devices, even when their position on the hub changes. There are two
instances where you might want to permanently assign a device type to a
device (so autodetect won’t try to re-assign it at the next boot-up): 1) if the
device was marketed after your CPN-5800 system was manufactured or 2) if
the system misidentifies the device.
6. (optional) To manually change the device type, select the arrow to the
right of the device type you wish to change.
Figure 3-29: Device Select Dialog (Your listing may differ.)
The Device Select dialog appears.