Pointmaker CPN-5800 - Manual (Page 44)

Page 38 - Pointmaker CPN-5800 Live Streaming Annotation System Pointmaker LLC.
Selecting Video Sources Section Three: CPN-5800 Menu System
You can override the default selection by choosing a different video mode. If there
is an output, but no input, the CPN-5800 will display the chalkboard (see
Activating the Chalkboard, on page 89).
You can select a video mode from the tablet, keyboard, or menu system. The menu
system offers additional adjustments for brightness, contrast, saturation and hue.
From the Tablet
Click on the icon for the desired video input.
NOTE: The inputs are listed on the template.
The CPN-5800 switches to the source you select.
From the Keyboard
Activate the desired Video In command.
Refer to the keyboard commands for your desired input, located in the
Appendix (see Activating the Menu, on page 29).
The CPN-5800 switches to the source you select.
From the Touch Screen
Activate through the use of touch screen areas.
Set two of the touch screen corners to PREV VIDEO and/or NEXT VIDEO.
You can then cycle through the available inputs and chalkboard. (see Touch
Screen Command Areas, on page 45).
The CPN-5800 switches to the source you select.
From the Menu System
1. Activate the menu system (see Activating the Menu, on page 29).
The Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select DISPLAY.