Pointmaker CPN-5800 - Manual (Page 61)

Pointmaker LLC Pointmaker CPN-5800 Live Streamimg Annotation System - Page 55
Section Three: CPN-5800 Menu System Serial Port Settings
CPN-5800 with Other Systems, on page 53), there are two ways to change
it. The next two steps describe how.
5. (optional) Select the arrow to the right of the device type you wish to
change.
Figure 3-25: Device Select Dialog
The Device Select dialog appears.
This dialog presents a scrolling list of all device types currently supported by
the CPN-5800 in alphabetical order. The Page Up and Page Down buttons
allow you to quickly scroll through the names until you find the device type
you desire. When you locate and select the name you wish to assign, it will
move to the center of the list, where it will be highlighted. The new device
type is now assigned.
Device types which cannot be selected are in white.
Only one of the two COMM ports may be set to Control Port. Either
COMM port may be set to Control Port, but only one at a time may be
assigned as Control Port.
When a “?” button is selected, a screen with further information about that
device type will be displayed.
If a device type that is used for communicating with other systems is selected,
an arrow button will replace its “?” button. Selecting that arrow button will
activate the control port dialog (see Figure 3-27: Control Port Dialog, on page
55).