Pointmaker CPN-5800 - Manual (Page 70)

Page 64 - Pointmaker CPN-5800 Live Streaming Annotation System Pointmaker LLC.
Multipoint Section Three: CPN-5800 Menu System
Multipoint
The Pointmaker Multipoint© feature gives multiple Pointmaker users the abil ity
to interactively mark over a common image. It utilizes the TCP/IP protocol
common to the Internet, in effect allowing the participants to be anywhere in the
world.
PVI-Server Requirements
A computer running the PVI-Server software is required to coordinate meet ings
with multiple Pointmaker units. A copy of the server software is available on
request. As an alternative, you are also welcome to use a Pointmaker LLC
sponsored server, which is set up on the internet.
Configure the Network Settings
The following steps are required to allow the unit to communicate with other
Pointmakers over a TCP/IP network.
1. Activate the menu system (see Activating the Menu, on page 29).
The Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select the NETWORK option.
The Network Menu appears (see Figure 3-31: Network Menu, on page 61).
3. Select the Multipoint option.
Figure 3-34: Multipoint Network dialog
The Multipoint Server dialog appears.