Pointmaker CPN-5800 - Manual (Page 23)

Pointmaker LLC Pointmaker CPN-5800 Live Streaming Annotation System - Page 17
Section Two:Installation Connecting Audio/Video Sources and Outputs
G
eneral
i
nstallation
Installation of the Pointmaker CPN-5800 can be divided into the following four
areas:
• Connect Audio/Video Sources and Outputs
• Connect Controllers
• Connect LAN
• Power Up (leaving the CPN-5800 to last)
Connecting Audio/Video Sources and Outputs
Analog audio input and output ports are supplied for stereo mini plugs (3.5mm).
Figure 2-1: Analog Audio Connectors
For connecting video sources, the CPN-5800 supports VGA and HDMI.
For connecting video displays (screens or projectors), there is support for VGA and
HDMI (and DVI-D, if you use a HDMI to DVI-D adapter).
NOTE: Make all connections before applying power.
VGA Connectors
If connecting VGA-Video:
1. VGA Input: Using a VGA video cable, connect a Pointmaker VGA INPUT
connector to a video output connector on a VGA video source.