Pointmaker CPN-5800 - Manual (Page 116)

Page 110 - Pointmaker CPN-5800 Color Video Marker Pointmaker LLC
Overview Section Six:Using RS-232 Commands
(CL) Clear
The “CL” command clears the markers from the video overlay.
(CL Clears All Markers
(CM) Marker Move
The “CM” command moves an active marker (pointer, frame, label or text or date/
time label) using the XY coordinate grid. (see X-Y Coordinate Grid, on page 108)
The coordinates are: XXXX = a numeric value for the horizontal axis point and
YYYY = a numeric value for the vertical axis point.
(CMXXXXYYYY Move an active marker to coordinates XXXX and YYYY
Example: (CMØØ25ØØ37
(CPF) Freeze
The “CPF” command freezes the current video image being displayed..
(CPFØ Turns the freeze off (video is live)
(CPF1 Activates the freeze
(CPFT Toggles the command from whatever is current
(CPI) Read Specific Image From USB
The “CPI” command reads an image from the USB flash drive. This com mand
uses the current Directory and Prefix assigned for capturing images. The nnnnn
part of the command also automatically sets the index number (See “Capture
Options” on page 46).
(CPInnnnn Read the requested image from the USB location
nnnnn is the index number of the image