Pointmaker CPN-5800 - Manual (Page 71)

Pointmaker LLC Pointmaker CPN-5800 Live Streamimg Annotation System - Page 65
Section Three: CPN-5800 Menu System Multipoint
The information entered into this dialog is technical and not usually under-
stood by the average user. You may need to acquire it from your IT depart-
ment or your ISP. It may help to make a copy of this page for them.
4. Enter the IP address of the computer acting as your Multipoint server.
Check with your IT administrator if you don’t know this address.
You may use our server at 199.223.210.127
5. Enter the Port number.
This is usually 10001. Our server’s port number is 10001.
6. Continue to the next section.
Create, Join or Exit a Multipoint Meeting
Once all the previous steps have been accomplished, the Pointmaker unit is ready
to support the Multipoint features. These steps explain how you can cre ate a
Multipoint meeting that other Multipoint enabled Pointmakers can join. We also
explain how you can join a Multipoint meeting that someone else has created.
Finally, we explain how to exit a meeting you have joined.
1. Select CONNECT.
Figure 3-35: Multipoint Connect dialog
The Multipoint Connect dialog appears.
2. If needed, enter the NAME of the meeting and the PASSWORD you wish
to assign.
You will need to communicate your choices for name and password to each of
the other people who will be attending the meeting.