Pointmaker CPN-5800 - Manual (Page 126)

Page 120 - Pointmaker CPN-5800 Color Video Marker Pointmaker LLC
Overview Section Six:Using RS-232 Commands
(FT) Frame Type
The “FT” command tells the Pointmaker which type of frame to display on-
screen.
(FTBØ Box Frame
(FTB1 Filled Box Frame
(FTCØ Circle Frame
(FTC1 Filled Circle Frame
(FTN Next Frame
(HI) HDCP Input setting for each HDMI input port
The “HI” command designates which HDMI input ports will allow HDCP
sources to be passed to the video outputs. See also the VIH command.
(HI7Ø HDCP input is off for1HDMI Input port
(HI71 HDCP input is on for1HDMI Input port.
(HI7T Toggle between the two modes for 1 HDMI port
(I) Marker Intensity or Brightness
The “I” command sets the intensity or brightness level for markers. Positive or
negative values may be coded.
(ISXXX Set the brightness level (absolute). XXX is numeric value between
0 and 999.
(ICXXX Increases brightness level (relative). XXX is numeric value
between 0 and 999.
(IC-XXX Decreases brightness level (relative). XXX is numeric value
between 0 and 999.